Short answer: embroider beanies on the folded cuff with a design about 1.75 to 2.25 inches tall. Use cutaway or tearaway with a water-soluble topping, and hoop with a cap frame or float the cuff on sticky stabilizer.
Beanie Basics
| Item | Recommendation |
|---|---|
| Design height | 1.75 to 2.25 in |
| Placement | Center of the cuff |
| Stabilizer | Cutaway or tearaway |
| Topping | Water-soluble, always on knit |
| Hooping | Cap frame, tubular hoop or floating |
Tips
- Unfold the cuff to stitch through one layer only.
- Do not stretch the knit when hooping.
- Choose designs with lighter density for knits.
Beanie logos are digitized like cap logos. See cap logo digitizing ($8 to $10) and how to embroider hats.
Frequently Asked Questions
Where do I embroider a beanie?
On the front of the folded cuff, through one layer.
Do I need topping on beanies?
Yes, a topping keeps stitches on top of the knit.
Can I use a cap logo file on a beanie?
Usually yes, if it fits the height and is not too dense.
Ready to stitch? Browse our embroidery design shop or order custom digitizing for your own logo or artwork.
